Bubbling noises from radiators are quite a common issue but dealing with this problem does not necessarily require any specialist technical expertise, and you may be able to stop the annoying noisy and bubbling in a few minutes with the right tools and the right advise, before having to us the experts in.
So, if you have a noisy radiator and are hearing gurgling or bubbling noises, the following guidance could help you resolve the problem without calling us, Ability plumbers.
Sludge, Silt and Magnetite
Most of the components that make up your central heating system are made from metal, and metal, as you probably already know, will expand and contract as it heats up and cools down. So, it may be that the sounds you hear your central heating make are just being caused by that natural process. Because pipework creaks and groans as it expands and contracts, it can be something that you get used to, but if your central heating is making strange noises, it’s best not to ignore it.
Loud Heating Systems
More serious causes of annoying and loud central heating should be thoroughly investigated and fixed by us at Ability plumbing, with the worst-case scenario being that you have to part with a little bit of money to get it sorted. But here at Ability, we like to give you any help and guidance as well as the right information to fix things for yourself, so this post is designed to help you identify the most common causes of noisy heating systems to help you to solve the problems without having to splash the cash on expensive repair bills. If its something simple and we can help, then we will.
the water pressure
Sometimes, a central heating system needs an extra push to get air out of radiators. Make sure your circulation pumps are on, turn up the water pressure to around two bars, and then bleed the radiator again.
the pumping system
Is your pump working correctly? Is the vent on the pump’s suction side? Is your pump speed right or is it too high If the gurgling stops when you turn your pump off, then you may have isolated the problem – repairing it, however, could be a trickier task.
always, do not attempt to repair your boiler or central heating system if you
are unsure of what to do. If a repair involves taking a gas boiler cover off,
then it is too complicated for a layperson and you need to get in touch with us
here at Ability and we will send an engineer.
noisy radiator is likely to have air trapped inside it. An easy way to diagnose
this problem is to feel the radiator when it is turned on – if it is hot at the
bottom but cold at the top, then it needs bleeding.
might seem obvious but bleeding your radiators could be all it takes to expel
this air, stop the radiator noise and allow you to enjoy a near-silent central
heating system once more. You simply need a radiator key to let the air out.
you find yourself bleeding your radiators more regularly than you think is
usual, then there is probably a leak in your central heating and plumbing
system somewhere. You could add some anti-corrosion inhibitors into the central
heating system when the leak has been repaired to ensure the problem does not
repeat itself. To find out more about cleaning your radiators, please visit our Website or call us here at Ability.
The Health and Safety Executive has announced that Capita Plc will continue to operate the Gas Safe Register, the official register of engineers licensed to undertake gas work, until March 2024.
As the preferred bidder determined by a public procurement process, Capita Gas Registration and Ancillary Services (CGRAS) – a division of Capita Plc – will deliver the five-year contract starting 1 April 2019. The renewed contract is expected to be worth £93 million over the five-year term.
Philip White, HSE’s Director of Regulation, says: “The bid from Capita / CGRAS was the strongest on cost and quality and we are confident they will continue to raise the standards of gas safety and provide a gas safe home for everyone.”
So don’t always call the cheapest plumber first. Be wary of the local cheap boiler repair. Call Ability and our team will endeavour to help. With a clear transparent and upfront cost, no hidden charges and reasonable cost. We are not your cheapest plumber or a company offering a local cheap boiler repair, but we will give you the best price and the service you deserve.
There are a number of different types of electric heaters that you can purchase, including halogen heaters, fan heaters, oil-filled heaters and convector heaters. Ability provide all options.
Ability use Fan heaters, and they are a popular choice but may be noisy and are often not as powerful as other types of heater. The Centre for Sustainable Energy (CSE) said a fan heater would be the preferable radiator when looking to heat a room for a short amount of time.
However, it said convector heaters will heat a room more thoroughly and these will be the best option if you are looking to heat a room for a couple of hours or more. Here at Ability we can supply these heaters while waiting for the boiler parts.
Oil-filled heaters are one of the more reliable of the varieties. Even though they tend to take slightly longer to heat up than other models, they will stay warmer for longer – even after they have been turned off. Again, here at Ability, we can supply oil heaters on a temporary basis and free of charge.
Halogen heaters are another option, likely to be most well known for keeping punters warm in pub gardens, but they work quickly and are relatively cheap to run.
The different forms of portable heater also come with different heat outputs, for example, the most common outputs are 1.2kilowatt (kW), 2 kW and 3kW. The higher the kilowatt, the more powerful the radiator is but it will also be more expensive. Equaliy can provide a good heat.
Information from the CSE shows the cost of running a 1.2kW halogen heater, on average, is 17p on a standard meter, which is generally cheaper compared to other models.
However, this has less heat output than a 2kW fan heater that costs 28p per hour – a massive 11p more to run per hour.
Whilst convector heaters may be a more expensive radiator to run, they will keep the room warmer for longer – and are a better option in the long term than a fan radiator.
However, to accurately determine whether an electric radiator would save you more money than central heating, a number of factors would need to analysed.
This includes how many windows the room you are looking to heat has, what size they are, how well your house is insulated and the style of house i.e. is it old, new, leaky or modern.
There are also two different types of central heating – gas and electric – which come with pros and cons. If youd like to know more please do not heasitiate to call us heare at Ability and one of the team will happily assist.
Once the mains water and electric power had been isolated, our electrician was able to attend later that morning and check and test the safety of the electrics.
Our emergency plumber had managed to stop the leak with a new stopcock valve and make a repair to the pipe that connects to the electric shower.
The electric shower was 15 years old and the customer had reported signs of poor performance and asked if we could fit a new electric shower in its place.
So between our plumber and electrician, we were able to supply and fit a new electric shower. All done in one visit from each of our engineers to save on time and cost. Another happy customer here at Ability.
Electric showers work in much the same way as other electric appliances that get hot, including electric toasters and hair dryers. They send an electric current through a piece of metal called a heating element. This has a moderate resistance, so it gets really hot when electricity moves through it. Cold water flows past the element, picking up the heat and heading out through the nozzle where you’re standing. So a basic form of heating up something.
How do mixer showers work?
Here at Ability, we can explain a little about mixer showers. The simplest showers are called mixer showers and, as their name suggests, they work by mixing hot and cold water from separate pipes to make warm water whose temperature is somewhere in between. The basic form of mixer shower is a Y-shaped rubber pipe that you fit over the hot and water faucets (taps) on a bath-tub. By adjusting the faucets, you create a single stream of water at exactly the temperature you want. This can become irritating.
The trouble with mixer showers like this is that the temperature is hard to control. If someone switches on a cold faucet or flushes a toilet elsewhere in your home, the cold water supply is reduced. That means there’s proportionally more hot water coming through your shower and, if the water’s too hot, you could be scalded. The opposite will happen if someone switches on a hot faucet you’ll suddenly find the shower turning freezing cold, this is where we can help at Ability.
Mixer showers that are plumbed into the wall overcome this problem by using built-in thermostats. They constantly adjust the temperature of the mixed water to ensure you’re not boiled like a lobster or frozen like a penguin by water that’s alternately too hot or too cold. Most mixer showers also have safety cut-outs that prevent you from turning the water up to dangerously high levels, which is good news if they’re being used by the infirm, frail elderly people or young children.
With more than two-thirds of homeowners not knowing if their water is supplied through potentially harmful lead water pipes, WaterSafe, the UK register for approved plumbers, is urging everyone to take the scratch test on lead pipes and its something we are recommending here at Ability.
A recent survey of 2000 homeowners by WaterSafe revealed 68% don’t know if they have potentially harmful lead water pipes in their property. We recently have to remove a section of leaking lead water main for one of our customers in Sevenoaks.
Water used for drinking and cooking that has been supplied through lead pipes can lead to a build-up of lead in the body. This can be bad for health – especially for babies and children, whose development can be affected. So contact us here at Ability plumbing and heating and we will do everything in our knowledge and capabilities to help you with lead water pipes.
A further 53% of homeowners don’t know that it’s their responsibility to replace lead pipes they find in their home. Watersafe say they need to replace them with copper or plastic ones approved for tap water.
Julie Spinks, Director of WaterSafe, says: “We’re asking property owners to do one thing during Lead Poisoning Prevention Week (Oct 21-27) – check your homes and business premises for lead water pipes, especially if you have an older property. It’s quite simple – find the water pipe where it enters your home, which is usually in a kitchen cupboard or under the stairs. Lead pipes are normally dull grey and soft and if you scrape the surface gently with a coin you’ll see the shiny silver-coloured metal underneath. It’s quite distinct from copper or plastic. If the pipes are painted, just scrape the paint off too.”
At Ability, we are qualified in water regulations and unvented water safety. The use of lead in plumbing has been banned in the UK for more than 25 years, so it’s houses built before 1970 that are most likely to have lead pipes.
Homeowners who find they do have lead pipes should contact their water supplier, who can test the levels of lead in the drinking water and offer advice on replacing them. so call Ability and book an engineer to check your lead water pipes.
WaterSafe recommends employing an approved plumber from its UK register to replace pipes, as they are fully qualified in the water supply regulations and are promoted by water companies to keep drinking water safe in homes. Find local, approved plumbers using a postcode search at watersafe.org.uk
An experiment showed wildly different quotes for installing exactly the same boiler. An investigation has revealed a staggering difference in quotes for installing a new boiler. You turn on your ailing boiler on a cold winter’s morning and discover that it’s finally given up the ghost.
The tempting thing to do is to call out the first available boiler engineer. But that could turn out to be a very costly mistake, exclusive research reveals.
Its always best to get more than one quotation and we do not recommend you necessarily go for the cheapest. Shop around, however, be cautious.
The quotes in this experiment, received for the same type of boiler, being installed in the same location, varied by as much as £3,200. One quote came in at a suspiciously low £1,500, and another at an eye-watering £4,764.
The investigation suggests that you don’t necessarily need to pay more to get the very best boiler. The quotes in this experiment for three of the Best boiler brands were no higher than quotes for brands that get middling scores in our boiler brand reviews. If you need a new boiler, make sure you get one that will last by picking from one of the best boiler brands. How much is a new boiler? The median price of the ten quotes was £2,595, with one as low as £1,500 and one as high as £4,764.
This week saw a drop in temperature, and the weather change sees our local Tunbridge Wells, Tonbridge, Sevenoaks, East Grinstead and Edenbridge plumbers step up a gear.
The long summer may be drawing to a close but the heat is on for our local and friendly plumbers. Working hard for our customers here in West Kent, East Sussex and Surrey, our plumbers step up a gear.
The holiday period seems to be over and as families and business alike start to prepare for the changing of the seasons. The plumbers here at Ability start to knuckle down to some seriously hard work ensuring that your boilers, heating, plumbing and electrical appliances are serviced and maintained.
That’s why we are on hand 24/7 for your needs. When the colder days set in, we want to be ready to help. Make your call today, to us here at Ability and we will do our best to see that your needs are met as our plumbers step up a gear.
A customer that called on Thursday last week, via a recommendation from a church that Ability work for, provided a five-star review.
As trusted plumbers in Tunbridge Wells and Tonbridge, we were able to come to the rescue of this elderly gentleman within 30 minutes and isolate his leaking stopcock. Trusted plumbers in Tunbridge Wells.
He was s impressed with our engineers work that he rewarded our plumber with some of his favourite homemade sponge cake. So another satisfied customer and a big pat on the back for one of the team here at Ability.
We always say, ask around, read all the information on the website carefully, check out the local phone numbers and make sure there is a local address.
We will remain your local plumbers recommend by others as its the small family business that we will keep going to maintain our quality reputation built over almost 40 years now.
Finally, the only sure way to know is by calling us up and talking with one of the family themselves. This we are always happy to do. So you can be safe in the knowledge that what you see really is what you get.
With a vast knowledge of the area, is based in the area since the company started we are not just local but friendly and always around. Just pick up the phone and call today for our Tonbridge central heating engineer or our Sevenoaks local plumbers. Your heating problems solved. Your Plumbing issues resolved and our happy customers mean our happy team here at Ability.
Ideal Boilers, one of our favourite manufacturers which have 500 staff and posted revenue of around £200m in 2014, has been a major employer in Hull for more than a century. Formed back in 1904 and loved by the British public. It is the third largest company in the UK market for domestic wall-mounted boilers, with annual sales of around 300,000 Ideal brand boilers, of which are built to high standard and fine quality.