Ability provides heating, plumbing and electrical assistance throughout the South East of England. Purchasing the right boiler is quite an investment and when considering to upgrade it is important that you find the best one that works for you.
Right boiler System Boilers
System boilers directly heat the central heating system taking water from the mains and heating it through a storage cylinder. They could be the right boiler for you if you have a property with two or more bathrooms and showers. System boilers deliver great water flow even if the water is being run from more than one place at a time.
System boilers do require a tank so if you think this is the right boiler for you there must be space within the house to accommodate it. If your property has poor incoming water pressure then a System boiler will not rectify this and a pump or mains boost tanks may also need to be installed.
Combi boilers are a compact unit that provides both heating and hot water. It may be the right boiler for you if your home lacks space to house a hot water cylinder and a cold water tank in the loft. The combi works by heating water straight from the mains when a hot water tap is turned on.
Combi boilers may not be the right boiler for you if you have poor incoming water pressure. Unlike with other systems, you will no longer have a separate immersion heater to provide hot water as back up if your combi does go wrong.
Back boilers were traditionally placed within the chimney of a property and would have a gas fire attached to the front of it. It provides heating and hot water throughout the property.
Although back boilers are still being used they are being frequently replaced with combi boilers. Back boilers are more expensive to run and let off more toxins than the combi boiler and this should be considered when deciding if the Back boiler is the right boiler for you.
If you would like a free no-obligation quotation or a service on your boiler whether it be gas, oil or lpg please give Ability a call on 01892 514495 or email email@example.com
With the colder weather approaching and the nights drawing in, we will start to put the heating on. Why go home to a cold house, when with the Hive Home Heating control, you can put the heating on in readiness of your return home.
The Hive Home heating system is a small wall-mounted device which communicates to a sensor placed on the boiler. It allows you to turn your heating on and off or alter the temperature of the thermostat from your smartphone wherever you are.
If you forget to turn the heating off you can do this from your smartphone
Savings on your energy bills
You are able to set up to 6-time slots to fit around your daily routine and can easily change them using the Hive app.
The Hive thermostat with geolocation will know when you have left the house and if you have left the heating on it will send an alert text so you can turn the heating off. It will also enable you to set a timer to turn it back on when you are due home.
The Hive Home works with the majority of the UK gas and LPG central heating systems.
There is no hard wiring required as it is battery operated unlike the Nest
The Hive Home is not compatible with storage heaters or individual plug-in electric room heaters. Although it works with most heating systems an engineer would need to come and check your specific boiler.
Ability has engineers who work on both Gas and Oil systems. The engineers are Gas Safe and Oftec registered and are more than qualified to confirm whether the Hive Home would be compatible with your heating system.
Ability covers most of the South East in particular, Kent, East and West Sussex so if you would like a free no-obligation quotation please call 01892 514495 or email firstname.lastname@example.org
Ability provides assistance with heating system, plumbing and electrical assistance in the Tunbridge Wells, Sevenoaks, East Grinstead, Maidstone, Bromley, Orpington and surrounding areas in Kent, East and West Sussex areas.
Heating systems currently attract dirt and obtain air within them. It is important to service regularly to remove these to ensure that all is working to its full potential. If dirt and air are left untreated it will inevitably lead to problems and could, therefore, lead to system breakdowns, which usually happens at the most inappropriate times
Ability has found that whilst technology has moved on and heating systems are far more advanced with smart controls etc we have also noticed that unfortunately, they are more sensitive to contamination from dirt particles and with airlocks.
Whilst many of us will have our boilers serviced regularly, we do not tend to think about the quality of water that is running throughout our heating systems. An inhibitor to minimise corrosion should be applied particularly in hard water areas. It is recommended that a heating system should be flushed every 5 to 6 years to ensure efficiency and stop limescale build-up and remove debris and rust.
Common Heating System Complains
Here at Ability we look at some of the most common system complaints to look out for, which suggest air and dirt which could jeopardise the performance of a light commercial or domestic heating system.
Noisy System – if the system is becoming unusually noisy when
in operation this is usually because there is air and build-up within the
heating systems resulting in the radiators and pipework banging and clanging as
the water tries to pass through.
Cold radiators – If radiators have cold spots or are cold at the bottom but warm at the top, this would suggest there is a build-up of debris within the systems and therefore a power flush may be required.
Air – if there is increased air in the system, this will accumulate in the radiators and potentially clog up the pump, this will usually be noticeable by a noisy system and should be treated as soon as possible to prevent problems.
Replacement of Parts- if parts are being replaced faster than expected this could be due to contamination within the heating system. When there are debris and air within the system the parts such as the pump are having to work harder to achieve the same output, leading to strain and excessive wear on parts. Replacing parts can be very costly and can be avoided by keeping the boiler regularly services, water treated and radiators bleed.
If you require any assistance please contact us on 01892 514495 or email email@example.com
Ideal Combi Boilers are economical to run as they heat the water as it is used and produces the heating for the home. They are small so will fit in a cupboard making them perfect for the Petit home. They come with a 7 to 12 years warranty depending on the make and model purchased. There are several models Ability have used in the Bromley and Orpington area and these include the Logic Max combi and the Vogue Max combi. These Ideal boilers are light, quick to install and easy to service. They have digital displays with clear to read pressure gauge. They also have quality brass filters and frost protection.
Ideal System Boilers
Ideal Boilers also provided system boilers which Ability have installed in the Orpington and Bromley area. These system boilers are fully pressurised and are filled via the mains cold water. It then heats the water for the cylinder and heats the central heating system. A heat pump then circulates the heat round making the radiators hot. The Logic Max and the Vogue Max system both come with 10 to 12 years warranty. Ability has found that they are easy to install and service. They are both light and small enough to fit into a cupboard.
If you are thinking about replacing your boiler and live in the Kent, East and West Sussex area why not give Ability a call on 01892 514495 or alternatively email firstname.lastname@example.org for a free no obligation quotation.