Heating systems currently attract dirt and obtain air within them. It is important to service regularly to remove these to ensure that all is working to its full potential. If dirt and air are left untreated it will inevitably lead to problems and could, therefore, lead to system breakdowns, which usually happens at the most inappropriate times
Ability has found that whilst technology has moved on and heating systems are far more advanced with smart controls etc we have also noticed that unfortunately, they are more sensitive to contamination from dirt particles and with airlocks.
Whilst many of us will have our boilers serviced regularly, we do not tend to think about the quality of water that is running throughout our heating systems. An inhibitor to minimise corrosion should be applied particularly in hard water areas. It is recommended that a heating system should be flushed every 5 to 6 years to ensure efficiency and stop limescale build-up and remove debris and rust.
Common Heating System Complains
Here at Ability we look at some of the most common system complaints to look out for, which suggest air and dirt which could jeopardise the performance of a light commercial or domestic heating system.
Noisy System – if the system is becoming unusually noisy when in operation this is usually because there is air and build-up within the heating systems resulting in the radiators and pipework banging and clanging as the water tries to pass through.
Cold radiators – If radiators have cold spots or are cold at the bottom but warm at the top, this would suggest there is a build-up of debris within the systems and therefore a power flush may be required.
Air – if there is increased air in the system, this will accumulate in the radiators and potentially clog up the pump, this will usually be noticeable by a noisy system and should be treated as soon as possible to prevent problems.
Replacement of Parts- if parts are being replaced faster than expected this could be due to contamination within the heating system. When there are debris and air within the system the parts such as the pump are having to work harder to achieve the same output, leading to strain and excessive wear on parts. Replacing parts can be very costly and can be avoided by keeping the boiler regularly services, water treated and radiators bleed.
If you require any assistance please contact us on 01892 514495 or email email@example.com